Full extension DWD XP Tipmatic Plus
Full extension DWD XP Tipmatic Plus
XXX
GRASS
DWD-XP
Register now and access more than 125,000 products
Optimal access to stored goods
Thanks to full extraction of drawer
Secure closing
Thanks to catch system
Precision adjustment of front gap (+2/–1 mm)
Thanks to depth adjustment at either side
No need to modify drawers
Integrated unhinging and transport guard
Activation across the entire front necessitates a minimum front gap of 4 mm, with a unit width of up to 1200 mm and a front height of up to 300 mm. Fronts higher than 300 mm necessitate a larger front gap.
Dimensions not binding. Subject to technical changes!
Datasheets(X)
CAD data (available after login)
We recommend the following work steps:
- 1. Pre-drill holes for guide
- 2. Position drilling jig for Tipmatic Plus and furnish drill hole for Tipmatic Plus latch mechanism
- 3. Attach guide and latch mechanism
 | |
Nominal length | 500 mm |
Load capacity | 40 kg |
Opening/closing system | Tipmatic |
Material | Steel |
Surface | Zinc plated |
Last viewed
Smooth blank sign
Plastic end grommet For rigid electrical conduits
Gas cartridge For DIGA® CS-2 POWER and DIGA® CS-3
Variable glass shelf support
Wrench
Polishing pads
Insulation holder W-DH
Particle board screw Wüpofast ® 2.0
Seal
Separating rail for multiple separation For 60 x 60 mm and 60 x 90 mm cable routing conduits