Formwork stop SA ON 171 For the spaced fastening of reinforcement mats
Formwork stop SA ON 171
FORMWRKSTOP-SAON171
Register now and access more than 125,000 products
- Convenient processing, as can be used on both sides
- Temporary positioning of formworks
- Hardly visible after removing the formwork
- For nails up to ∅ max. 3.7 mm
Length calculation for nails used on concrete surfaces:
Penetration depth (min. 25 mm / max. 40 mm) + thickness of component to be fastened = nail or shaft length
Datasheets(X)
 | |
Material | PP - Polypropylene |
Färg | Grey |
Diameter of stop (ØdA) | 48 mm |
Height (HA) | 30 mm |
Diameter of hole | 3.7 mm |
Suitable for device type | Würth BST 350, Hilti DX 2, Hilti DX A40, Hilti DX A41, Würth BST MA-75 (single shot kit for single fixtures), Hilti DX 350, DX 36M, DX 460, DX 5 |
Last viewed
1/2 inch socket wrench insert metric, hexagon, short
1/4-inch socket wrench insert For TX screws
1/4 inch socket wrench insert, metric short
1/4 inch cardan joint
Spatula
Staple For WTG 40 thermo tackers
HSS annular cutter
1/2" socket wrench insert For TX screws, short
Adapter for topping up leak stop additive
Hand tap, second tap HSS DIN 352