Food-grade solvent
Thinner for 2C lacquer epoxy food industry
THINNER-FOODGRADE-1L
Register now and access more than 125,000 products
Features
Suitable for reducing the viscosity of food-grade 2C paint (art. no. 5866 202 30x) in cold environments, absorbent pads or to improve levelling on pavements.
Advantages
- Low odour.
- It does not modify the food properties of food grade epoxy paint 2C.
Benefit
Improves the final performance of food-grade epoxy paint finish when supports require it.
These instructions are merely recommendations based on our experience. We recommend performing tests for each new type of application or surface to be treated.
Datasheets(X)
Mix with food-grade paint 2C (art. no. 5866 202 30x) if necessary for the support to be applied, adding up to 10 % solvent. Mix evenly.
Contents | 1 l |
Weight of content | 850 g |
Chemical basis | Alcohol with additives |
Colour | Transparent |
Density | 0.78 g/cm³ |
Conditions to maintain shelf life from production | at 5°C to 25°C |
Density conditions | at 20°C, 50% relative humidity |
Shelf life from production | 12 Month |
Last viewed
AW® bit
Carpenter's square With marking holes
Paintwork degreasers
AT 48 automatic door seal
Ceramic abrasive grain flap wheel
Customer service sticker
Slotted countersunk head screw DIN 963, A2 stainless steel, plain
Small mist lubricator For pneumatic tools
Concrete screw with large pan head W-BS/S
Extractor hood WSA 125 for angle grinders