Foam strip for filler work FILLER MASK
Sealing tape for surfacer, FILLER MASK
MASKTPE-FILLER-GREY-10X15MM-50M
Register now and access more than 125,000 products
- Quick to position. Attaches to joints using pressure, saving a lot of time masking before using filler.
- Perfect seal. Prevents spray on the inside of doors, bonnet, tailgate etc.
- Contains no adhesive. No chance that the adhesive will deteriorate, making it easier to apply.
- Does not produce pronounced cuts in the filler. Conventional tape results in cuts that are difficult to sand. The feathering that the strip leaves is sanded much more easily.
- Porous material. Absorbs some of the excess product.
It is best to remove the strip before the filler is completely dry, to avoid possible foam residue.
Datasheets(X)
Colour | Grey |
Length | 50 m |
Width | 10 mm |
| Technical data | |
| Foam material | Polyurethane |
| Density | 25 kg/m³ |
| Measurements | 10 mm x 15 mm (right triangle) |
Last viewed
Useit® Superpad wood sanding disc
1/2 inch socket TX IP
Rechargeable battery LI-AS-18 V
Metric double box-end wrench Hexagon with POWERDRIV®
Solvent for polyurethanes
Seal set 6 pieces, plastic
Angle grinder EWS 14-125-EQ Universal
Metric double open-end wrench DIN 3110/ISO 1085
Hexagonal bolt with shank SB FITTINGS DIN EN 15048-1 ISO 4014, steel 8.8U, hot-dip galvanised, with nut ISO 4032
Arizona® Perfect soft vehicle dry abrasive paper For all paint repair work with intermediate and fine sanding