Flexible ratcheting combination wrench
RTCHCOMBIWRNCH-FLEXIBLE-WS9
Register now and access more than 125,000 products
Box end drive:
- POWERDRIV modified bi-hexagon
- Finely toothed - 72 teeth, 5° arc swing
- Precision-engineered ring core for smooth and secure movements
- Narrow for working in the tightest spaces
Flexible ratchet head:
- 180° joint
- Highly flexible for tightening or loosening, especially in confined spaces
Standard: max. torque in accordance with DIN 899
Geometry:
- Straight box end
- 15° offset heads
This special tool may only be subjected to the maximum torque. For this reason, the wrenches are only suitable for loosening bolts to a limited extent.
Datasheets(X)
Loosen bolts using the open end and tighten using the ratchet mechanism on the box end.
 | |
Width across flats (SW) | 9 mm |
Length (L) | 150 mm |
Thickness of jaw (a1) | 5.2 mm |
Ring thickness (a2) | 6.9 mm |
Width of jaws (outside) (b1) | 18.8 mm |
External diameter of ring (d) | 17.5 mm |
Max. torque (F max.) | 46 Nm |
Material | Tool steel |
Surface | Chrome plated |
Last viewed
Cutting wheel for pipe cutter
Wire cable 1 x 19 A4 stainless steel
Blade receptacle uninsulated
Sliding door shell-type handle oval
W-VIZ-A DYNAMIC anchor rod, zinc-plated steel
Halogen-free threaded connector LH IP67
Washer with large outside diameter DIN 9021, polyamide
Hexagon bolt with thread up to the head DIN 933, A4 80 stainless steel, plain
Raised contersunk head tapping screw, C shape with H recessed head DIN 7983, A2 stainless steel, plain. With cross recess.
Countersunk tapping screw, shape C with AW drive WN 112-compliant, steel, zinc plated, blue passivated (A2K), type C with tip