Fleece sanding sleeve For expansion and inflatable rollers
Fleece sanding sleeve
SANDDISC-FLC-SLEV-FINE-100X100MM
Register now and access more than 125,000 products
- Reinforced nylon sanding fleece with needled-through fabric carrier
- High tear resistance, uniform sanding pattern, waterproof and stretch-resistant
Max. rotating speed: 2800 rpm
Datasheets(X)
Burnishing, matting, polishing, removing tempering colour, removing surface defects (light scratches) and smoothing surfaces.
Materials to be processed:
Stainless steel, steel, brass, copper and aluminium, wood and plastics
At high speeds a coarse grain acts like a finer grain and at low speeds a fine grain acts like a coarser one.
Use tools with a low contact pressure; high contact pressure leads to premature wearing.
With insufficient chip removal, do not increase the contact pressure, but instead use a coarser grain.
Width x length | 100 mm x 100 mm |
Design | Fine |
Colour | Blue |
Grid size | P280 |
Last viewed
Screw with flattened half round head with collar and hexagon socket ISO 7380-2, steel 10.9, zinc-plated, blue passivated (A2K)
Synthetic corundum vulcanised fibre disc
Folded hand towel
Pan head tapping screw, C shape with H recessed head DIN 7981, steel, zinc-plated black (A2S), shape C, with tip
Slotted countersunk head screw DIN 963, A2 stainless steel, plain
Thin-walled heat-shrink hose Without internal adhesive
Hexalobular-type cheese head screw, low head
Classic warm jacket
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, A2-70 stainless steel
Bag pressure piston