Flat washer without chamfer DIN EN ISO 7089, steel, hot-dip galvanised (hdg)
ISO 7089 steel 200 HV hot dip galvanized
WSH-ISO7089-200HV-(HDG)-12
Register now and access more than 125,000 products
- Replaces DIN 125
- Washers with hardness class 200 HV can be used in combination with bolts in strength class ≤ 8.8 and nuts in strength class ≤ 8
Specified dimensions not binding. Subject to technical changes!
Datasheets(X)
 | |
Suitable for screw thread | M12 |
Form | 0 - not applicable |
Internal diameter (d1) | 13 mm |
Outer diameter (d2) | 24 mm |
Thickness (h1) | 2.500 mm |
Standards | ISO 7089 |
Material | Steel |
Vickers hardness, HV | 200 HV |
Surface | Hot dip galvanized |
RoHS-compliant | Yes |
Suitable for | 0 - not applicable |
Last viewed
Rust remover Rost-Off
Collated nails and gas cartridge NG CS-2/3 HFB
Cover cap for screws with head recess
Extension for 1 1/4 inch core drill bit
System case empty range 8.4.1 raster foam
Die holder DIN EN 22568 Performance
Twist drill bit HSCO DIN 338 type RN
Hole puncher assortment 12 pieces with manual hydraulic punch
Multi-use bimetal bandsaw blade One blade for any job
Segmented grinding disc, synthetic corundum, fabric plate