Flat washer without chamfer DIN EN ISO 7089, steel, hot-dip galvanised (hdg)
ISO 7089 steel 200 HV hot dip galvanized
WSH-ISO7089-200HV-(HDG)-10
Register now and access more than 125,000 products
- Replaces DIN 125
- Washers with hardness class 200 HV can be used in combination with bolts in strength class ≤ 8.8 and nuts in strength class ≤ 8
Specified dimensions not binding. Subject to technical changes!
Datasheets(X)
 | |
Suitable for screw thread | M10 |
Internal diameter (d1) | 10.5 mm |
Outer diameter (d2) | 20 mm |
Thickness (h1) | 2 mm |
Standards | ISO 7089 |
Material | Steel |
Vickers hardness, HV | 200 HV |
Surface | Hot dip galvanized |
RoHS-compliant | Yes |
Last viewed
Hand rasp for tyre repair
Soft Interface foam
Spiral clamping pin, heavy-duty design ISO 8748 steel plain
Overlapping cover cap, for hexalobular socket and AW drive
1/2-inch socket wrench insert, TX head For external TX screws, short
Countersunk tapping screw shape C with H recessed head DIN 7982, A4 stainless steel, plain
Slotted raised countersunk head screw DIN 964, A2 stainless steel, plain
Cupboard rail support, round
Adapter for extension hose
Door handle A 807 on oval escutcheon