Flat washer with chamfer DIN EN ISO 7090, steel, hot-dip galvanised (hdg), hardness class 200 HV
ISO 7090 steel 200 HV hot dip galvanized
WSH-ISO7090-200HV-(HDG)-8
Register now and access more than 125,000 products
- Replaces DIN 125
- Washers with hardness class 200 HV can be used in combination with bolts in strength classes ≤ 8.8 and nuts in strength classes ≤ 8
Specified dimensions not binding. Subject to technical changes!
Datasheets(X)
 | |
Suitable for screw thread | M8 |
Internal diameter (d1) | 8.4 mm |
Outer diameter (d2) | 16 mm |
Thickness (h1) | 1.600 mm |
Standards | ISO 7090 |
Material | Steel |
Vickers hardness, HV | 200 HV |
Surface | Hot dip galvanized |
RoHS-compliant | Yes |
Last viewed
Angular joint shape CS with retaining clip DIN 71802, steel, zinc-plated, blue passivated (A2K)
Screw
Concealed hinge, TIOMOS click-on 110/30 A With integrated damping, three damping settings available
Covering plug Type 9
1/2 inch diamond wet core drill bit
Sleeves
Long-life & Speed diamond cup wheel for hard material
Allen key
Service key for aerator
Straight pin, unhardened DIN 7, A1 stainless steel, plain