Flat washer with large external diameter ISO 7093-1 steel 200 HV zinc-plated, blue passivated (A2K)
ISO 7093-1 steel 200 HV zinc plated
WSH-ISO7093/1-200HV-(A2K)-12
Register now and access more than 125,000 products
- Washer with large outside diameter
- Hardness min. 200 HV
- DIN 9021 has been replaced by international standard DIN EN ISO 7093-1
- Nominal sizes 2.5 and 7 are no longer included in DIN EN ISO 7093-1 and therefore remain valid as DIN 9021
- The widths across flats of diameters M10, M12, M14 and M22 in DIN EN ISO 4014 have changed over DIN 931
- Products with these diameters are therefore in accordance with both DIN 931 and DIN EN ISO
 | |
Suitable for screw thread | M12 |
Internal diameter (d1) | 13 mm |
Outer diameter (d2) | 37 mm |
Thickness (h1) | 3 mm |
Standards | ISO 7093-1 |
Material | Steel |
Surface | Zinc plated |
Vickers hardness, HV | 200 HV |
RoHS-compliant | Yes |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
3/8 inch fully manual ratchet With freewheel function
Opening angle limiter, 120° For Nexis 170° furniture hinge
Rust Stop Quattro primer
Gas filter ABEK1 For breathing protection series 175
Screw with flattened half round head with collar and hexagon socket ISO 7380-2, steel 10.9, zinc-plated, blue passivated (A2K)
pias® drilling screw with hexagon head and drill tip Case-hardened steel, zinc-plated, blue passivated
Pin punch set, large dimensions 5 pieces
Metric TX bit 10 mm hexagon drive
Toggle anchor W-KD with washer and hexagon nut, zinc-plated steel
Metric combination wrench with POWERDRIV®
