Flat gasket For flat-sealing screw joints of heating and drinking water pipes
Flat gasket
FLSEAL-DN8
Register now and access more than 125,000 products
DVGW-certified
Simultaneous straining of the gasket with the maximum values for temperature and operating pressure is not possible. The specifications also depend on the medium, so they are therefore only guidelines.
Datasheets(X)
 | |
Material | Aramid fibre |
Colour | Grey |
DN nominal width | DN 8 |
Internal diameter (d1) | 8.0 mm |
Outer diameter (d2) | 15.0 mm |
Thickness (h) | 2.0 mm |
Min. temperature resistance | -50 °C |
Max. temperature resistance | 200 °C |
Max. operating pressure | 40 bar |
Approval mark | DVGW |
Last viewed
Standard electrician's tool case 31 pieces
1/4-inch torque wrench with reversible ratchet
Needle scaler attachment For pneumatic chipping hammers
Sandpaper strip Useit® Superpad vehicle
Knife blade, L-shaped, toothed
System insert 4.4.1, bits
Particle board screw Wüpofast ® 2.0
Hand cleaner in tub
1-ear clamp with insert ring
Bond + Seal structural adhesive