Flat gasket For flat-sealing screw joints of heating and drinking water pipes
Flat gasket
FLSEAL-DN20
Register now and access more than 125,000 products
DVGW-certified
Simultaneous straining of the gasket with the maximum values for temperature and operating pressure is not possible. The specifications also depend on the medium, so they are therefore only guidelines.
Datasheets(X)
 | |
Material | Aramid fibre |
Colour | Grey |
DN nominal width | DN 20 |
Internal diameter (d1) | 20.0 mm |
Outer diameter (d2) | 30.0 mm |
Thickness (h) | 2.0 mm |
Min. temperature resistance | -50 °C |
Max. temperature resistance | 200 °C |
Max. operating pressure | 40 bar |
Approval mark | DVGW |
Last viewed
Screwdriver PH striking cap with hexagon shank
Interchangeable cylinder cores for locking system MS 5000
Compressor Compact 20 L oilfree
System case 8.4.2
Retaining jaws Adjustable for wire stripping pliers
Nozzle and needle kit ADVANCE W18
Cordless LED hand-held lamp ERGOPOWER PEN+
Cutting disc for steel and stainless steel
Fixing clamp
VARIFIX® triangular bracket For attached assembly of C-mounting rails (longitudinal, transverse, diagonal)