Flat gasket For flat-sealing screw joints of heating and drinking water pipes
Flat gasket
FLSEAL-DN12
Register now and access more than 125,000 products
DVGW-certified
Simultaneous straining of the gasket with the maximum values for temperature and operating pressure is not possible. The specifications also depend on the medium, so they are therefore only guidelines.
Datasheets(X)
 | |
Material | Aramid fibre |
Colour | Grey |
DN nominal width | DN 12 |
Internal diameter (d1) | 12.0 mm |
Outer diameter (d2) | 18.5 mm |
Thickness (h) | 2.0 mm |
Min. temperature resistance | -50 °C |
Max. temperature resistance | 200 °C |
Max. operating pressure | 40 bar |
Approval mark | DVGW |
Last viewed
Hexagonal bolt with shank for pressure container construction ISO 4014, A4 stainless steel
Silicone repair tape
Cover cap, AW drive For D-anchors
Guide rail for circular saw
Concrete screw with pan head W-BS/S
Plastic base with anti-slip plate
System insert 8.4.1, combination wrench
Twisted rod For rivet nut setting pliers HES 510
HSS annular cutter
HSS annular cutter