Fine-grain pen - FNGRAINPIN-LACQUER-FN-WALNUT-5G

Fine-grain pen

Name: Fine-grain pen
Brand: Würth
SKU: 0890403602

Fine grain pin
FNGRAINPIN-LACQUER-FN-WALNUT-5G

Art.-no. 0890403602

EAN 4056807392615

All versions

Similar products

Individual price display after login

Fine-grain pen

Art.-no. 0890403602

Individual price display after login

Quantity

x 5 pcs

Exclusively for trade customers

Login/Register
Call customer service: +34928189825

For restoring fine wood grains and textures with glaze.

Fine brush tip

Suitable for crust-free glaze application, particularly for fine retouching work (fine lines and points).

Good adhesion

Good adhesion to painted and wooden surfaces

Resistant to smearing and waterproof

Fast-drying

Can be painted over

Notice

Please note that the colours shown may differ from the original colour for printing-related reasons.

Application area

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications as well as storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by the provision of this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet 1

Safety data sheet 2

Certificates/ Documents

Application area

For replicating fine wood grains/textures after having been filled in a base colour with 2-component repair filler. Recommended for indoor use

Instructions

Remove the screw cap, and the pen is ready to use. The missing grain is traced with the tip of the fine-grain pen. For more application information, please refer to the technical data sheet.

Chemical basis	Acrylic resin paint
Colour	Walnut
Density	0.9 g/cm³
Density conditions	at 20°C
Min. dust-drying time	1 min
Max. dust-drying time	2 min
Conditions for dust-drying time	depending on room temperature and layer thickness
Min. grip strength	5 min
Grip strength conditions	depending on room temperature and layer thickness
Min. flashing point	23 °C
Ignition temperature	270 °C
Water-soluble	No
Weight of content	5 g
Shelf life from production	24 Month

Suitable glove:

Product

Description

Disposable nitrile glove

Description:

Permeation level: 0

Liquid-proof, food-safe disposable glove

Disposable nitrile grip glove

Description:

Permeation level: 0

Unique, diamond texture for optimal grip

Disposable glove Nitrile Grip Comfort

Description:

Permeation level: 0

Very robust disposable gloves with excellent grip thanks to special nubs and maximum wearing comfort thanks to cotton flocking inside

Chemical cut protection glove W-310 Level D

Description:

Permeation level: 3

Very robust, liquid-proof protective glove that combines optimal cut protection with chemical protection

Vinyl chemical and moisture protective glove

Description:

Permeation level: 4

Fully dipped protective glove with vinyl coating on cotton jersey lining

Chemical protective glove, Butyl

Description:

Permeation level: 6

Gas-tight and resistant to exhaust gases produced by combustion processes

Chemical protective glove PVC w. backing fabric

Description:

Permeation level: 4

Very robust, submersible PVC glove with cotton support fabric

Nitrile chemical protective glove with cotton velour finish inside

Description:

Permeation level: 3

Nitrile chemical protective glove long, heavy-duty design

Description:

Permeation level: 5

Disposable gloves, nitrile, extra strong, type A

Description:

Permeation level: 1

Durable and robust disposable gloves with excellent chemical protection

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.