Welcome to Würth Canarias For trade customers only

Fine-grain pen

Fine grain pin
FNGRAINPIN-LACQUER-FN-OAK-RUSTIC-5G

Art.-no. 0890403601
EAN 4056807392592

Prices for customers after login
Fine-grain pen

Art.-no. 0890403601

Prices for customers after login
Quantity
PU
x 5 pcs

Exclusively for trade customers

Register now and access more than 125,000 products

For restoring fine wood grains and textures with glaze.

Fine brush tip


Suitable for crust-free glaze application, particularly for fine retouching work (fine lines and points).



Good adhesion


  • Good adhesion to painted and wooden surfaces

  • Resistant to smearing and waterproof


Fast-drying



Can be painted over

Notice

Please note that the colours shown may differ from the original colour for printing-related reasons.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications as well as storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by the provision of this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Datasheets(X)

Safety data sheet

Certificates/ Documents

 | 

 | 

Application area

For replicating fine wood grains/textures after having been filled in a base colour with 2-component repair filler. Recommended for indoor use

Instructions

Remove the screw cap, and the pen is ready to use. The missing grain is traced with the tip of the fine-grain pen. For more application information, please refer to the technical data sheet.

Chemical basis

Acrylic resin paint

Colour

Oak, rustic

Density

0.9 g/cm³

Density conditions

at 20°C

Min. dust-drying time

1 min

Max. dust-drying time

2 min

Conditions for dust-drying time

depending on room temperature and layer thickness

Min. grip strength

5 min

Grip strength conditions

depending on room temperature and layer thickness

Min. flashing point

23 °C

Ignition temperature

270 °C

Water-soluble

No

Weight of content

5 g

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information