Filler VAKU Light
Filler VAKU Light
FILR-(VACU LIGHT)-1.3L+50G
Register now and access more than 125,000 products
- Optimal adhesion to all materials used in the bodywork such as zinc-plated sheet metal, aluminium and galvanised surfaces
- Easy to use
- Quick drying
- Easy to cut
Excess drying agent does not react to polymerisation and may subsequently damage the paint applied.
1. For zinc-plated surfaces, wait 1 to 2 hours before grinding.
2. Do not grind on galvanised surfaces before applying "Vaku Light".
Datasheets(X)
Automotive
Cleans and polishes surfaces of rust, dirt, grease and loose paint residue. Apply the paste and note that it takes 4 to 5 minutes for the drying process to begin. After 20 minutes, the mixture is completely dry and ready for use, to be dried or ground with water.
Contents | 1.3 l |
Smell/fragrance | Characteristic |
Weight of content | 1549 kg |
Chemical basis | Polyester resin |
Colour | Beige |
Hardener content | 2 % |
Density | 1.23 g/cm³ |
Density conditions | at 20°C |
Conditions for drying time | at 20°C |
Min. processing temperature | 5 °C |
Fully hardening/curing conditions | 20°C |
Max. VOC concentration | 2 % |
Shelf life from production | 12 Month |