Fibreglass combi standing ladder
Fibreglass combi standing ladder
STANDLDR-2PCS-FBRGLS-H6,08M-2X12RUNGS
Register now and access more than 125,000 products
Material: fibreglass-reinforced polyester resin.
High mechanical hardness and resistance to moisture, acids, corrosion, ultraviolet rays etc.
Combi standing ladder.
Locking system that allows it to be used as an extension or standing ladder.
Detachable
The two sections can be used separately.
Manufactured according to UNE-EN 131 and UNE-EN 61478 standards.
Approved.
Insulators resistant to electrical and thermal agents, do not transmit voltage, heat or cold.
Greater comfort and safety at work.
Extendible top section with wheels.
It makes it easier to glide.
Lower traverse with non-slip rubber pads.
Increased stability.
Rungs with large non-slip bearing surface.
Increased safety.
The rungs remains in the horizontal position during operation.
Increased comfort in use.
Red rung in inverted position.
Define the maximum lifting height.
Stainless-steel fittings A2.
Increased durability.
Datasheets(X)
The soles of shoes and the rungs of the ladder must be free of any non-slip substances.
The stability of the ladder must be ensured. Floor support should always be on the rubber pads and not on the traverse
Matière | PES - Polyester |
Number of rungs | 2 x 12 |
Longueur | 6080 mm |
Load capacity | 150 kg |
Last viewed
Bond + Seal structural adhesive
Circular saw blade, wood For cordless hand-held circular saw HKS 10-A/12-A
LED surface-mounted lamp ABL-230-2
Storage box (empty)
Cutting knife, curved
Permanent deep-hole marker with cap
Countersunk tapping screw, shape C with hexalobular drive ISO 14586, steel, zinc-plated, blue passivated, shape C (with tip)
Chemical anchoring WIT-EA 150
Brass nozzle set For PURlogic® Xpress foam gun
1/4-inch and metric ratcheting double box-end wrench For hexagon drive