Female safety connections. Series 2000 with safety valve with conical system
Safety coupling conical thread steel series 2000
CUPL-QCKACTION-PN-S2000-(D6,5-10MM)
Register now and access more than 125,000 products
Safety valve with conical system. Its on/off safety system allows full air evacuation prior to the final disconnection of the fitting.
- One-handed disconnection of the fitting lock that automatically discharges all the air contained in the pneumatic circuit, allowing the connector to be removed in complete safety.
Large air flow (at working pressure 6 bar) and maximum working pressure 15 bar.
- It enables optimal power for the entire system resulting in higher productivity and lower energy costs
Ergonomic design, low coupling force allows one-handed operation.
- Easy, safe and effortless connection/disconnection.
Sealed connections
- Low power consumption and high efficiency.
Datasheets(X)
1. Take the black technopolymer body between your fingers, push it into the safety fitting and release your hand.
2. Air is completely drained from the pneumatic circuit and the male adapter of the connected equipment is retained.
3. Slightly insert the male adapter of the connected pneumatic equipment and remove it without any resistance.
Length (L) | 57 mm |
Last viewed
Clamping rods For airline profiles
Round wire snap ring and snap ring groove for drill holes
Half-shell trapezoidal crimping insert
1/2 inch power cardan joint With 1/2 inch square drive and ball lock
Round cable passage in two parts
Paint tank for ADVANCE W9 gun
Sandpaper strip Useit® Superpad wood
Hexagonal bolt with thread up to the head ISO 4017, A4-70 stainless steel, plain
Flat washer without chamfer DIN EN ISO 7089, steel, hot-dip galvanised (hdg)
Silencer