Fast-setting mortar STOPLEAK
Quick-setting mortar STOPLEAK
ASMBYMORT-QCK-STOPLEAK-GREY-5KG
Register now and access more than 125,000 products
Features
- Fibre-reinforced, resin-modified mortar with controlled shrinkage and ultra-fast setting.
- Excellent resistance to moisture, ageing, solvents and wear.
- High adhesion to most building materials: concrete, stone, brick.
Advantages
- Applicable horizontally, vertically and even against gravity. Strongly resistant to sagging.
- As it is alkaline in nature, it protects rebars.
- High initial compressive and flexural strength.
Benefits
- Physical-mechanical characteristics very similar to those of concrete.
- Resists high pressures by blocking the water leak to ensure safety.
- Fast, clean and safe.
Do not add extra sand, lime or cement to the mixture because it may cause dripping, sagging or adhesion problems.
Do not apply on dirty or broken surfaces, or surfaces covered in paint residue.
These instructions are merely recommendations based on our experience. We recommend performing tests for each new type of application or surface to be treated.
Datasheets(X)
Plugs water leaks as an emergency measure in the event of damaged pipes, tanks and swimming pools and, in general, to plug elements made solely of concrete.
Suitable for use in tunnels, galleries, wells or concrete channels.
Ideal for ultra-fast anchoring against door frames, handrails, traffic posts, bolts, light boxes etc.
Preparing the substrate: remove all traces of damaged concrete, dust, paint, wax and release agents. Open the hole to allow the product to penetrate deeply. In high temperatures or on highly absorbent substrates, moisten the substrate first.
Preparing the mixture: Mix 5 kg of the product with 1 litre of water quickly by hand or with a trowel and let stand for 2 minutes before applying.
Application: As soon as the 2 minutes is up, take the mixture in your hand and shape it into a rounded point. Then push the product into the crack in the concrete through which the water is being lost and press hard for 60 seconds. To finish, remove any excess and clean around the hole.
Storage
Maximum recommended storage time: One year in its original container, well sealed and sheltered from the elements (under cover at a temperature between 5°C and 30°C).
Chemical basis | Cement |
Colour | Grey |
Density | 1.5 g/cm³ |
Density conditions | at 20°C |
Application conditions | at 20°C and 55% relative humidity |
Min. working life | 60 s |
Max. working life | 90 s |
Further processing conditions | at 20°C and 65% relative humidity |
Min. curing time | 60 s |
Min. processing temperature | 5 °C |
Max. processing temperature | 35 °C |
Min. surface processing temperature | 5 °C |
Max. surface processing temperature | 35 °C |
Max. curing time | 40 s |
Max. flexural strength | 0.8 N/mm² |
Max. compressive strength | 0.8 N/mm² |
Weight of content | 5 kg |
Shelf life from production | 12 Month |
Conditions to maintain shelf life from production | at 10°C to 30°C |
Last viewed
Eye bolt DIN 444, steel 4.6, zinc-plated, blue passivated (A2K), shape B
Drilling screw, flat head with H cross recess pias®
Driver Classic protective glove
Twist drill bit HSS DIN 340 type RN 130°
Cordless grease gun
Boot PU AGRO S5
Reversible blade For screwdriver with T-handle function
Reversible blade For screwdriver with T-handle function
Slotted countersunk head screw DIN 963, brass, plain
Metric combination wrench with POWERDRIV®