Exhibition stand construction adhesive tape
Adhesive tape
FSTNGTPE-DB-ASSEMBLY-FAIRS-50MMX25M
Register now and access more than 125,000 products
No adhesive residues
The open side of the adhesive tape enables residue-free removal from the surface (recommended adhesion period: 2–3 weeks).
Excellent adhesion of the covered side
The side covered with silicone paper enables permanent adhesion on all surfaces found in the construction sector (e.g. stone, metal, plastic, glass etc.).
Can be removed by hand
Quick and easy to apply the tape.
With surfaces and plastics to be bonded that contain softeners, the softeners may alter the adhesive coat. This will impair the strength of the adhesive.
The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.
Datasheets(X)
For laying carpeting at trade fair stands. Other applications for which the material to be bonded needs to be removed again leaving no residues.
The surfaces to be adhered must be dry and free from dust, grease and silicone. To ensure proper adhesion, the tape must be sufficiently pressed onto the material to be glued.
The open (less adhesive) side is glued to the floor of the trade fair premises. The carpeting to be laid is applied to the covered (highly adhesive) side. This ensures proper adhesion of the tape to the carpeting; it can then be removed from the floor again, leaving no residues, at the end of the trade fair.
Adhesive base | Acrylate |
Backing material | Rayon fabric |
Colour | White (base material) |
Roll width | 50 mm |
Length of roll | 25 m |
Thickness | 0.22 mm |
Min./max. processing temperature | 15 to 30 °C |
Min./max. temperature resistance | -30 to 110 °C |
Ultraviolet resistance | Yes |
Moisture resistance | Yes |
Elongation at break | 40 % |
Shelf life from production/conditions | 18 Month / dry and dust-free storage area, 20°C and 50% relative humidity |
Last viewed
Flat blade fuse MAXI Silver
Knurled nut, high profile DIN 466, steel 5, zinc-plated, blue passivated (A2K)
Angle grinder EWS 7-115 BASIC
Hexagon Socket Head Cap Screw with centre, with low head DIN 6912, steel 8.8, plain
1-ear clamp with insert ring
Cylindrical pin, hardened DIN 6325, steel, plain
Silicone fluid silicone spray
S50 diamond socket cutter
Tension springs with double eyelets assortment 368 pieces in system case 4.4.1. DIN 2097
Shim ring DIN 988, steel, plain