Electromagnetic hold-open device, single-leaf with GTS 640 and integrated smoke detector
HOLDOPNDEV-EFR-GTS640-DIN/L-SILVER
Art.-no. 0688003610
EAN 4061975572561
Register now and access more than 125,000 products
The system complies with the latest test specifications
- Magnet switch-off time in the event of an alarm min. 3 sec.
- Overpressure capacity of system/door can be set to below 80 N (for use without manual switch).
- Circuit monitoring of ceiling detectors and manual switches.
All electronic components in the slide rail are fully pre-assembled, wired, and the modules checked
- This enables faster and flawless assembly.
- Smoke detector with contamination indicator and automatic calibration for preventing false alarms.
Quick mounting of the slide rail using only two screws
- Same drilling pattern as with slide rails for the door closer.
Easy laying of the connecting cable through cable trunking integrated into the slide rail.
The use of a manual switch is not absolutely necessary, but is recommended.
The system operator is required to put the system into service after initial installation, to examine it monthly for the first 12 months, and afterwards, if there are no functional defects, to examine it every 3 months and annually maintain it. Akademie WÜRTH offers seminars for this.
The delivery time is approx. 10 working days.
| Classification key in line with DIN EN 1154: 1996 + A1:2002 | |||||
| 3/4 | 8 | 2 - 5 | 1 | 1 | 4 |
Dimensions subject to change. Subject to technical changes.
Datasheets(X)
A hold-open device is an electrical device that is used to keep fire protection closures open. The door leaf can be held in the open position until the device is either tripped manually or automatically via the smoke detector in the event of a fire or power failure, then the door closes. For single-leaf fire, smoke protection and panic doors made of metal or wood.
![]() | |
Area of application | Hold-open device, Object area, Private area |
Suitable for | Fire protection doors, Smoke protection doors, Panic doors |
Suitable for number of doors | 1 |
Fire protection certified | Yes |
Suitable for barrier-free construction according to DIN 18040 | Yes |
Colour | White aluminium RAL 9006, Stainless steel, matt |
Colour slide rail | Silver |
Gloss level | Matt |
Suitable for min./max. door width | 850-1250 mm |
DIN direction | DIN L |
Mounting option | Hinge side: standard mounting, With assembly base plate |
Opening angle | 170 Degree |
Min./max. door closer size | 2-5 |
Material | Aluminium / stainless steel / plastic / steel |
Surface | Lacquered |
Surface of the body | Lacquered |
Surface of the rail | Lacquered |
Suitable for min./max. door thickness | 40-120 mm |
Locking range | 80° - 130° |
Closing speed | Infinitely adjustable by valve 170° - 0 ° hinge side normal assembly |
Closing delay | Infinitely adjustable by valve 120° - 70 ° hinge side normal assembly |
Latching speed | Infinitely adjustable by valve 10° - 0 ° |
Back-check action | Infinitely variable adjustable from 70 ° |
Min./max. temperature conditions | -15 to 40 °C |
Nominal voltage | 230 V/AC |
Standards | EN 1154:1996 + A1:2002, EN 1155:1997 + A1:2002, EN 16034, EN 16035, DIN 18040-1, DIN 18040-2, SPEC 1104 |
EC declaration of conformity (CE) | Yes |
Environmental Product Declaration | Yes |
Construction product | Yes |
Included in delivery | 1 x door closer, 1 x mounting base plate, 1 x sliding rail with electromagnetic locking device and integrated smoke detector system, 1 x sliding rail arm, 1 x fastening material and installation instructions |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
