Elastic waterproofing coating RECUFLEXIM
Elastic waterproof coating RECUFLEXIM
SFRCOAT-WATERPROOF-BROWN-25KG
Register now and access more than 125,000 products
- Waterproof and non-breathable.
- Excellent adhesion to properly prepared substrates.
- Ageing- and weather-resistant.
- Excellent flexibility, even at extreme temperatures (-10°C to 80°C).
- Absorbs expansion and movement.
- Stable colour spectrum.
- Fungicide and anti-mould.
- Easy to apply.
- Ready for use.
- Non-toxic and self-extinguishing.
Coating not suitable for regular foot traffic. Do not apply the product in adverse weather conditions such as rain, snow etc.
On horizontal surfaces or surfaces with inclines less than 3 %, where there is a possibility of water pooling, or in environments of excessive and continuous sun, cold, snow exposure etc., we advise applying a coat of RECULASTIC.
These instructions are merely recommendations based on our experience. We recommend performing tests for each new type of application or surface to be treated.
Datasheets(X)
For waterproofing both new and renovated porous tiles; fibre cement roofs, after treating the degraded parts with RECUPRIMER art. no. 0893199800; bituminous asphalt sheets; and PE or PU insulation materials.
Protection against rainwater, unpressurised moisture and leaks both horizontally and vertically.
Waterproofing and sealing fissures, cracks and joints.
Substrates must be clean and dry, free from particles and grease. For non-porous or non-absorbent media, we recommend using Recuprimer art. no. 0893199800. Apply with roller, brush or airless spray gun (in this case thin with 20 % water and apply a minimum of three coats) on the surface to be treated. Apply between two and three coats. If applying three coats, use fibreglass mesh between the first two coats.
Consumption
As a guideline, the amount used per coat when applied vertically can range from 0.35 to 0.40 kg/m2. This amount is between 0.75 and 1.00 kg/m2 when applied horizontally.
Chemical basis | Natural rubber |
Colour | Terra brown RAL 8028 |
Min. processing temperature | 5.0 °C |
Max. processing temperature | 40.0 °C |
Shelf life from production | 12 Month |
Last viewed
Silicone spray
High-visibility, two-tone polo shirt with short sleeves
Anchor rod WIT-C 200, yellow zinc-plated steel
Random orbital disc-type sander ETS 150-E twin
Hammer-resistant lightweight core bit
Screwdriver for hexagon drive with flexible shaft
Half-head strip nail, 34°, with ring-shaped shaft Steel, zinc-plated yellow (A2C)
Caracas S1P low-cut safety shoes
Needle and nozzle kit ESENCIAL W21
ALG 18 V M-CUBE charger