Elastic sealing mortar
Sealing mortar elastic
SEALMORT-ELA-BEIGE-310ML
Register now and access more than 125,000 products
Wide range of adhesions without primers.
- Universal application.
- Good adhesion on a wide variety of substrates. Can bond different materials.
Sealant adhesive with high mechanical performance
Glues and seals at the same time. The joints are flexible, with the capacity to absorb expansion and vibrations.
Does not alter the aesthetic balance of the job
Sand beige and cement grey colours to adapt to the mortar or cement joints of the job.
Grainy
Thanks to its siliceous aggregate and mineral filler content, it perfectly recreates the surface of the plaster.
Good resistance to atmospheric agents and UV rays
Suitable for visible joints and outdoor applications.
Paintable
Compatible with plastic paints (except products containing solvents).
Free from halogens, solvents, isocyanates, silicones.
Steel parts must be primed before sealing.
For printing reasons, the colours reproduced may differ slightly from the original tones.
This data only contains recommendations based on our experience. Testing prior to use is recommended. For more information, see the product data sheet.
Datasheets(X)
Filling and sealing fissures, cracks and expansion joints.
Assembly and sealing of window frames and doors made from wood, iron and powder-coated aluminium.
Chimney, roof and slate finishes.
Assembly and sealing of gypsum plasterboard, expanded polyurethane, natural stone and marble.
Sealing of bathtubs, showers and toilets.
Stone grout.
Laying tiles and vitreous mosaics in pools, saunas and bathrooms.
Sealing joints on balconies, galleries etc. Does not alter the appearance of mortar joints.
Paste-like consistency, ready to use. Surfaces should be dry, clean and free from dust, grease and silicone. The application temperature is between 5°C and 40°C.
Can be applied as a sealant with a gun or a spatula.
Chemische Basis | Acrylic copolymers |
Farbe | Beige |
May be walked on after max. | 25 d |
Verarbeitungstemperatur min./max. | 5 to 40 °C |
Full resilience | 12 h |
Conditions for full resilience | at 20°C and 50% relative humidity |
Inhaltsgewicht | 471.2 g |
Lagerfähigkeit ab Herstellung | 12 Month |
Lagerfähigkeit ab Herstellung Bedingung | at 5°C to 30°C |
| Technical data | |
| Base | Acrylic |
| Average density | 1.52 ± 0.12 g/ml |
| Temperature resistance | From - 20°C to + 80°C |
| Curing speed | Approx. 5 mm/12 hrs. at 20°C and 50 % relative humidity |
| Elasticity | Measured as elongation 7 % |
| Totally cured | 25-29 days |
| Retraction value | 16.5 %-17 % |
| Paintable | Yes, except with products containing solvent |
| Storage | Do not store at temperatures lower than 5°C |
Last viewed
Cable tie KBL 1 made of polyamide with plastic tongue
Spare parts - machines
Stretch X S3 safety shoe
End cap set For screwing/clipping on
Dichtfix sealant
1/4" socket wrench insert metric, long
Allen key set with lock washer
Expander tool for drop-in anchors, without visual installation control
Pipe separating chisel For pneumatic chipping hammers
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)