Easy sanding plaster RENOVA
Filler in powder form RENOVA easy sanding
FILR-PWD-RENOVA-EASYSND-WHITE-15KG
Register now and access more than 125,000 products
- Very easy sanding.
- Quick and easy renovation of pitting, stippling, walls after removing wallpaper or carpet, and painted substrates.
- Provides thin, durable finishes for any interior decoration.
- Excellent adhesion.
- Can apply consecutive coats, both thinly and thickly, without waiting for the coats to dry. Can apply wet on wet.
- Does not shrink.
- Does not repel.
- Easy application by trowel or spatula.
- The surface does not require pre-roughing before application.
These instructions are merely recommendations based on our experience. We recommend performing tests for each new type of application or surface to be treated.
Datasheets(X)
Ideal for covering textured walls and renovating interior substrates.
To obtain the ideal mixture, add 0.4 litres of water for each kg of product and stir until a complete homogeneous paste is obtained.
Apply using a trowel or spatula.
Clean tools with water immediately after application.
Shelf life from production | 60 Month |
| Technical data | |
| Binder | Water-soluble polymers and mineral fillers |
| Thinner | Water |
| Apparent density of powder | Approx. 0.80 g/cm3 |
| Granulometry | < 200 P (Fine) |
| pH | 7 + 0.5 |
| Application | |
| Apparent density of paste | Approx. 1.40 g/cm3 |
| Application temperature | Between 5°C and 30°C |
| Consumption | 0.95 kg/m²/mm |
| Mix | 0.45 L of water for 1 kg of powder |
| Working time | Approx. 24 hrs. |
| Drying time (23°C and humidity 65 %) | Approx. 12 hrs. varies depending on thickness |
| Painting | After dry |
| Maximum thickness | 5 mm |
| Cleaning work tools | With water immediately after use |
Last viewed
1/2 inch power cardan joint With 1/2 inch square drive and ball lock
Grinder protection shield for Basic face shield
Straight-edge From thick-walled light metal profile with middle web and two plastic end caps
Wheel hub grinder type B
Tex-Rein cleaning cloth
Wire stripping pliers, adjustable
Knurled nut, high profile DIN 466, steel 5, zinc-plated, blue passivated (A2K)
1/2 inch impact socket wrench insert hexagon, metric, short
Pocket tape measure with plastic housing
Suction hose, clip-on For ISS and TSS series