ELMO® heat-shrink hose, thick-walled 0.6/1 kV Shrink rate 6:1
Heat shrink hose thick wall
HSHRHOSE-MEDWL/THWL-1KV-33/5,5
ELMO
Register now and access more than 125,000 products
- Inside coated with hot-melt adhesive
- Good physical, chemical and thermal properties
Datasheets(X)
Wherever extremely large size differences need to be bridged (specific plug configurations, etc.).
 | |
Type | 33/5.5 |
Diameter (D) | 33 mm |
Diameter (shrunk) | 5.5 mm |
Sleeve-wall thickness when shrunk | 3.4 mm |
Length | 1200 mm |
Dielectric strength | 20 kV/mm |
Min./max. temperature conditions | -55 to 110 °C |
Min. shrinkage temperature | 120 °C |
Change in length (after shrinking, in %) | -10 - 1% |
Ultraviolet resistance | Yes |
Material | Polyolefin |
Halogen-free | Yes |
Colour | Black |
Last viewed
Wire end ferrule with plastic sleeve
U-clip, type 4
Hexalobular screw with flattened half round head
Rechargeable battery Li-ion 18 V BASIC M-CUBE
ELMO clip with locking
Wing repair washer According to DIN 522, zinc-plated steel, blue passivated (A2K)
Thin-walled heat-shrink hose Without internal adhesive
VM 175 full face mask
Mounting set for fire protection mortar
1000-V insulated 1/2" T-handle spanner