E5 PRO S – Sanitary Silicone Acetate
E5 PRO S - silicone acetate sanitary
SILSEAL-ACE-(E5 PRO S)-TRANSP-310ML
Register now and access more than 125,000 products
- Resistant to ageing, weather and UV
- Paint-compatible, test before use
- Coloured version is bitumen-proof
- Slight discolouration is possible in some applications
This information is only a recommendation based on our experiences. Preliminary testing required.
Datasheets(X)
For connecting, expansion and sealing joints indoors and outdoors, such as wall or ground connections. Also suitable for sanitary glazing and applications and for cold climates.
The surface must be clean, dry and load-bearing. Note the joint dimensions, see technical data sheet. Prime the joints with PE back-fill material, Art. no. 0875...
Contents | 310 ml |
Chemical basis | Acetate |
Colour | Transparent |
Continuous motion absorption | 25 % |
Shore A hardness | 18 |
Min./max. processing temperature | 5 to 40 °C |
Min./max. temperature resistance | -40 to 100 °C |
Min. skin-formation time | 20 min |
Conditions for skin-formation time | at 23°C and 50% relative humidity |
Min. breaking elongation | 250 % |
Fungicidal properties | Yes |
Building material class | E - Normally inflammable |
Shelf life from production | 20 Month |
Building material class/conditions | E - Normally inflammable / in accordance with DIN EN 13501 |
Density/conditions | 0.98 g/cm³ / at 25°C |
Density | 0.98 g/cm³ |
Last viewed
Metric double open-end wrench DIN 3110/ISO 1085
HSS WN centre drill bit For HW hole saws (flat cut) and MBS HW cylinder saws
Circlip for bore hole, standard version, shape J DIN 472 for bore holes, spring steel, phosphated and oiled
Threaded fitting, stainless steel, with ball joint
Hexagon socket set screw with flattened tip ISO 4027, A4 stainless steel, 21H, plain
Threaded fitting, steel, with ball joint
Sandpaper triangle Useit® Superpad, wood
Drilling jig For escutcheon fittings with WC thumbturn
Screw seal, self-centring
Nut with corrugated washer