E5 PRO S – Sanitary Silicone Acetate
E5 PRO S - silicone acetate sanitary
SILSEAL-ACE-(E5 PRO S)-GREY-310ML
Register now and access more than 125,000 products
- Resistant to ageing, weather and UV
- Paint-compatible, test before use
- Coloured version is bitumen-proof
- Slight discolouration is possible in some applications
This information is only a recommendation based on our experiences. Preliminary testing required.
For connecting, expansion and sealing joints indoors and outdoors, such as wall or ground connections. Also suitable for sanitary glazing and applications and for cold climates.
The surface must be clean, dry and load-bearing. Note the joint dimensions, see technical data sheet. Prime the joints with PE back-fill material, Art. no. 0875...
Inhalt | 310 ml |
Chemische Basis | Acetate |
Farbe | Grey |
Continuous motion absorption | 25 % |
Shore A hardness | 18 |
Verarbeitungstemperatur min./max. | 5 to 40 °C |
Temperaturbeständigkeit min./max. | -40 to 100 °C |
Min. skin-formation time | 20 min |
Conditions for skin-formation time | at 23°C and 50% relative humidity |
Min. breaking elongation | 250 % |
Fungicidal properties | Yes |
Lagerfähigkeit ab Herstellung | 18 Month |
Dichte / Bedingung | 0.98 g/cm³ / at 23°C, 50% relative humidity |
Dichte | 0.98 g/cm³ |
Datasheets(X)
Last viewed
Visor for safety helmet SH-2000 For SH 2000-S safety helmets
1/4-inch socket wrench insert For TX screws
Circlip for bore hole, standard version, shape J DIN 472 for bore holes, spring steel, phosphated and oiled
Threaded fitting, stainless steel, with ball joint
Retaining spring For pneumatic chipping hammers
Fixanchor internal thread W-FAZ-IG/A4 - push-through installation
Collet chuck for flexible shaft
Safety outlet 3 socket
Heuer parallel vice with adjustable central guide
Position finder MD 12
