Welcome to Würth Canarias For trade customers only
Dust extraction drill bit Plus D - EXTRDRL-PLUS-D-D10-L270-WL150MM Dust extraction drill bit Plus D - EXTRDRL-PLUS-D-D10-L270-WL150MM Dust extraction drill bit Plus D - EXTRDRL-PLUS-D-D10-L270-WL150MM Dust extraction drill bit Plus D - EXTRDRL-PLUS-D-D10-L270-WL150MM
Dust extraction drill bit Plus D - EXTRDRL-PLUS-D-D10-L270-WL150MM - 1
Dust extraction drill bit Plus D - EXTRDRL-PLUS-D-D10-L270-WL150MM - 2
Dust extraction drill bit Plus D - EXTRDRL-PLUS-D-D10-L270-WL150MM - 3
Dust extraction drill bit Plus D - EXTRDRL-PLUS-D-D10-L270-WL150MM - 4

Dust extraction drill bit Plus D

Dust extraction drill bit Plus D
EXTRDRL-PLUS-D-D10-L270-WL150MM

Art.-no. 0648451027
EAN 4058794197211
All versions

Prices for customers after login
Dust extraction drill bit Plus D

Art.-no. 0648451027

Prices for customers after login
Quantity
PU
x 1 pcs

Exclusively for trade customers

Register now and access more than 125,000 products

Extremely fast hammer drill bit with aggressive two-cutter head for drilling and suction in one work step

Dust-free drilling


  • The dust is sucked up immediately as it occurs in the drill hole

  • Protects the user from damage to health

  • Increases the service life

  • No subsequent cleaning of the drill hole is required

  • Significant prevention of dust produced on the construction site


Very fast drilling with long service life


Robust 2-blade head geometry and extra-large extraction holes directly in the head area



Suitable for all standard, certified vacuum cleaners of dust class M


Flexible, one-piece rubber vacuum adapter



Precise spot drilling


Special self-centring tip

Notice
  • Iron reinforcements may only be drilled through with permission from a structural engineer

  • Observe the enclosed operating instructions

  • Only for use with dust class M vacuums
Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

 | 

 | 

Application area
  • Clean, dust-free drill holes for setting chemical anchors

  • Drill holes for subsequent installation or for replacing incorrectly set reinforcement bars

  • Work in critical areas that must be kept free of dust, such as public buildings, hospitals etc.

  • Renovation work where dust should be avoided and the user should be protected

Diameter (Ø)

10 mm

Length

270 mm

Working length

150 mm

Number of cutting edges

2 PCS

Tool holding device

Suitable for SDS-plus

Drilling speed (point system)

4 of 4 points

Smoothness of running (points system)

2 of 4 points

Accuracy (point system)

2 of 4 points

Reinforcement strength (points system)

1 of 4 points

Service life (points system)

3 of 4 points

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Würth Catalogue

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information
Show all product details