Drilling screw, round head with collar and H cross recess pias®
pias steel zinc plated pan head H with flange
SCR-DBIT-PANHD-FLG-H2-(A3K)-4,8X70
Register now and access more than 125,000 products
Drilling, threading, screwing-in — all in one work step
Therefore considerably reduced time and effort
Exact drilling diameter for each screw connection
- Resulting in minimisation of thread tolerance
- Always an optimum connection
Prevents installation errors
- The pressed-on flange generates a lower surface pressure, which helps to prevent stress cracks
- Contact pressure during use approx. 100 N/screw in with depth stop if necessary
- Drilling screws must be processed with a suitable drill driver (e.g. cordless drill driver with depth stop)
- The use of impact screwdrivers is not permitted
- Drilling screws must be attached perpendicular to the surface of the component
Galvanized drilling screws may only be used where dampness is not to be expected.
For fasteners with a construction permit, the permit, and in particular Part 2 "Special regulations", must always be observed.
Datasheets(X)
CAD data (available after login)
The self-drilling screw for fastening plastic and thin sheet metal to metal sub-structures.
Last viewed
ASSY® D
plug screw Countersunk head
Oxym silicone sealant for windows
Hand tap, second tap HSS DIN 352
1/4" socket wrench insert For hexagon socket, metric
1/2-inch impact socket wrench insert hexagon, metric, long
Spirit level with two handles
Precision screwdriver, TX
Tensioning strap
System assortment 2.4.1, power socket wrench, internal/external TX, 1/2 inch
Pin terminal conn MATE-N-LOK (M-N-L) 2.1 Uninsulated