Welcome to Würth Canarias For trade customers only
Drilling screw, round head with collar and H cross recess pias<SUP>®</SUP> - SCR-DBIT-PANHD-FLG-H2-(A3K)-4,8X22 Drilling screw, round head with collar and H cross recess pias<SUP>®</SUP> - SCR-DBIT-PANHD-FLG-H2-(A3K)-4,8X22 Drilling screw, round head with collar and H cross recess pias<SUP>®</SUP> - SCR-DBIT-PANHD-FLG-H2-(A3K)-4,8X22
Drilling screw, round head with collar and H cross recess pias<SUP>®</SUP> - SCR-DBIT-PANHD-FLG-H2-(A3K)-4,8X22 - 1
Drilling screw, round head with collar and H cross recess pias<SUP>®</SUP> - SCR-DBIT-PANHD-FLG-H2-(A3K)-4,8X22 - 2
Drilling screw, round head with collar and H cross recess pias<SUP>®</SUP> - SCR-DBIT-PANHD-FLG-H2-(A3K)-4,8X22 - 3

Drilling screw, round head with collar and H cross recess pias®

pias steel zinc plated pan head H with flange
SCR-DBIT-PANHD-FLG-H2-(A3K)-4,8X22
ZEBRA PIAS

Art.-no. 02185 22
EAN 4038898520337
All versions

Prices for customers after login
Drilling screw, round head with collar and H cross recess pias®

Art.-no. 02185 22

Prices for customers after login
Quantity
PU
x 250 pcs

Exclusively for trade customers

Register now and access more than 125,000 products

Zinc plated steel, blue passivated (A3K), with cross recess

Drilling, threading, screwing-in — all in one work step


Therefore considerably reduced time and effort



Exact drilling diameter for each screw connection


  • Resulting in minimisation of thread tolerance

  • Always an optimum connection


Prevents installation errors

Notice
  • The pressed-on flange generates a lower surface pressure, which helps to prevent stress cracks

  • Contact pressure during use approx. 100 N/screw in with depth stop if necessary

  • Drilling screws must be processed with a suitable drill driver (e.g. cordless drill driver with depth stop)

  • The use of impact screwdrivers is not permitted

  • Drilling screws must be attached perpendicular to the surface of the component

Galvanized drilling screws may only be used where dampness is not to be expected.


For fasteners with a construction permit, the permit, and in particular Part 2 "Special regulations", must always be observed.

Application area

The self-drilling screw for fastening plastic and thin sheet metal to metal sub-structures.

Product information

Würth Catalogue

Datasheets(X)

CAD data (available after login)

Certificates/ Documents

 | 

 | 

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Würth Catalogue

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information
Show all product details