Drilling screw, hexagon head with wood thread and sealing washer piasta®
Slf-dr scr, f/con, piasta, hx, sl wsh
SCR-DBITR-WOTHR-WSH14-(RUS)-6,0X75
ZEBRA PIASTA
Register now and access more than 125,000 products
The sealing washer consists of an A2 stainless steel metal back with vulcanised seal made of high-quality EPDM
The screw with the sealing washer ∅ 14 mm, 3 mm EPDM is particularly suitable for fastening corrugated profiles (e.g. 18/76) on wooden substructures
Suitable for component combinations tI / tII according to approval ETA-10/0184
- Steel / wood
- Aluminium/wood
The material thickness to be drilled is max. 2 mm. However, it is possible to drill two sheets (2 x 1.5 mm) in one step.
Datasheets(X)
CAD data (available after login)
 | |
Matière | Stainless steel A2, 1.4301 |
Finition | Flake zinc |
Material of sealing washer | Stainless steel A2 |
Surface of the sealing washer | Plain |
Material of gasket | Ethylene propylene diene terpolymer rubber |
Conforme à la norme RoHS | Yes |
Forme de tête | Hexagon head with collar |
Type d’entrainement | Hexagon |
Type de filetage | Wood screw thread |
Forme de pointe | Drilling tip |
Underground | Wood |
Diamètre nominal (d1) | 6 mm |
Länge (l1) | 75 mm |
Outside diameter of the sealing washer (d2) | 14 mm |
Washer thickness (h1) | 4 mm |
Hauteur de tête (k1) | 5.4 mm |
Drill tip length (lp) | 5.7 mm |
Screw-thread length with drill tip | 66 mm |
Entrainement extérieur (s1) | WS8 |
Max. material thickness to be drilled through (metal) | 2 mm |
Min. recommended substructure thickness | 40 mm |
Approval | ETA-10/0184 |
Min./max. recommended installation speed (idling) | 1200-1800 rpm |
Last viewed
Visor for scaffolding construction helmet
Point chisel with SDS-plus drive arbour
7-pin socket 12 V With cut-off contact for rear fog light
Turnbuckle
Allen key
Quick-action chuck 1-sleeve
Drop-in anchor W-ED/S
Screwdriver for hexagon drive with flexible shaft
Knee pads
Allen key, hexagon socket short version