Drilling screw, hexagon head with sealing washer pias<SUP>®</SUP> - SCR-DBIT-WSH19-WS10-(A3K)-6,3X25

Drilling screw, hexagon head with sealing washer pias<SUP>®</SUP> - SCR-DBIT-WSH19-WS10-(A3K)-6,3X25 - 1

Drilling screw, hexagon head with sealing washer pias<SUP>®</SUP> - SCR-DBIT-WSH19-WS10-(A3K)-6,3X25 - 2

Drilling screw, hexagon head with sealing washer pias<SUP>®</SUP> - SCR-DBIT-WSH19-WS10-(A3K)-6,3X25 - 3

Drilling screw, hexagon head with sealing washer pias^®

Name: Drilling screw, hexagon head with sealing washer pias ®
Brand: Würth
SKU: 0214763259

Self-tapping facade cons screw pias sealing washer
SCR-DBIT-WSH19-WS10-(A3K)-6,3X25
ZEBRA PIAS

Art.-no. 0214763259

EAN 4011231274463

All versions

Similar products

Prices for customers after login

Drilling screw, hexagon head with sealing washer pias^®

Art.-no. 0214763259

Prices for customers after login

Quantity

x 200 pcs

Exclusively for trade customers

Login/Register
Call customer service: +34928189825

Case-hardened, zinc-plated blue passivated steel and sealing washer. For attaching steel profiles to steel substructures ≤ 5 mm

The sealing washer consists of a zinc-plated metal back made of steel with vulcanised seal made of high-quality EPDM

Reduction of the assembly time using the drill bit tip by min. 50%:

Drilling without centrepunching

Thread moulding

Securing

All in one operation

Suitable for component combinations t_I / t_II according to approval ETA-10/0184

Steel/steel - for ∅ 4.2 mm–∅6.3 mm

Notice

Galvanised drilling screws may only be used where dampness is not to be expected. For fasteners with a construction permit, the permit, and in particular Part 2 "Special regulations", must always be observed.

Product information

Würth Catalogue

Datasheets(X)

CAD data (available after login)

Certificates/ Documents


Material	Steel
Surface	Zinc plated
Material of sealing washer	Steel
Surface of the sealing washer	Zinc plated
Material of gasket	Ethylene propylene diene terpolymer rubber
RoHS-compliant	Yes
Head type	Hexagon head with collar
Drive type	Hexagon
Thread type	Self-tapping screw thread
Shape of tip	Drilling tip
Underground	Steel Aluminum
Nominal diameter (d₁)	6.3 mm
Length (l₁)	25 mm
Head diameter (d_k)	13.2 mm
Outside diameter of the sealing washer (d₂)	19 mm
Washer thickness (h₁)	4 mm
Head height (k₁)	6.4 mm
Drill tip length (l_p)	8.4 mm
Screw-thread length with drill tip	22 mm
External drive (s₁)	WS10
Max. material thickness to be drilled through (metal)	6 mm
For max. substructure thickness	5 mm
Min./max. attachment thickness	0-9.5 mm
Approval	ETA-10/0184
Min./max. recommended installation speed (idling)	1200-1800 rpm