Drilling screw, hexagon head with collar and slot pias®
pias steel zinc plated hexagon head with flange
SCR-DBIT-HEX-FLG-SL-WS8-(A3K)-4,8X16
ZEBRA PIAS
Register now and access more than 125,000 products
Drilling, threading, screwing-in — all in one work step
Therefore considerably reduced time and effort
Exact drilling diameter for each screw connection
This minimises the thread tolerance thereby always ensuring an optimum connection
Prevents installation errors
- Drilling screws must be processed with a suitable drill driver (e.g. cordless drill driver with depth stop)
- The use of impact screwdrivers is not permitted
- Drilling screws must be attached perpendicular to the surface of the component
Galvanized drilling screws may only be used where dampness is not to be expected. For fasteners with a construction approval, the approval, and in particular Part 2 "Special regulations", must always be observed.
Datasheets(X)
CAD data (available after login)
- Especially suited for use in ventilation systems and air-conditioning technology
- Hexagon head with slot for quick loosening in case of repairs
 | |
Normes | CS |
Matière | Steel |
Finition | Zinc plated |
Conforme à la norme RoHS | Yes |
Forme de tête | Hexagon head |
Type d’entrainement | Slot/hexagon |
Type de filetage | Self-tapping screw thread |
Forme de pointe | Drilling tip |
Diamètre nominal (d1) | 4.8 mm |
Länge (l1) | 16 mm |
Flange diameter (dk) | 10.5 mm |
Hauteur de tête (k1) | 4.45 mm |
Drill tip length (lp) | 4.5 mm |
Entrainement extérieur (s1) | WS8 |
Max. material thickness to be drilled through (metal) | 4.0 mm |
Min. recommended substructure thickness | 1.5 mm |
Min./max. recommended installation speed (idling) | 1200-1800 rpm |
Last viewed
Centre punch setting jig set For DWD-XP, H95 decor height
3/8" socket wrench insert Inch, hexagon, short
Round head screw with square neck DIN 603, A4 stainless steel
3/8 inch socket wrench insert metric, hexagon, short
Collet chuck for flexible shaft
Double ring ratchet wrench set 32 pieces
1/4 inch socket wrench insert, metric short
pias® drilling screw, raised countersunk head with AW drive
Half face mask, reusable, accessories
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, plain