Welcome to Würth Canarias For trade customers only
Drilling and cutting foam CUT+COOL - CUTFM-DRL-(CUT-COOL)-400ML

Drilling and cutting foam CUT+COOL

Drilling/cutting foam CUT+COOL
CUTFM-DRL-(CUT-COOL)-400ML

Art.-no. 0893050007
EAN 4056807032979
Prices for customers after login
Drilling and cutting foam CUT+COOL

Art.-no. 0893050007

Prices for customers after login
Quantity
PU

Exclusively for trade customers

Register now and access more than 125,000 products

Highly active, high-performance cutting foam for all machining work.
  • Well-adhering cutting oil foam

  • Does not drip from the area to be lubricated, therefore also suitable for overhead work

  • Can be washed off with clean water, therefore no degreasing work with cleaners is necessary

  • Excellent cooling effect and strong adhesive properties

  • Low consumption, can therefore be used as minimum quantity lubricant

  • Strong performance thanks to high cutting speeds with low tool wear
Notice

Free from sulphur, mineral oil, heavy metals and resin as well as no volatile hydrocarbons. Free from substances that impair wetting of paint.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

 | 

 | 

Application area

High-performance glycol ether-based cutting oil foam.


Enables economical machining with minimal tool wear.

Instructions

Spray the lubrication point briefly - repeat if necessary. To clean, rinse off product residues with clean water

Contents

400 ml

Container

Aerosol can

Colour

Yellowish

Chemical basis

Glycol and polyglycol ether, additives

Shelf life from production

24 Month

Drilling and cutting oil Drilling and cutting oil Perfect Drilling and cutting paste Perfect Drilling and cutting oil Eco Drilling and cutting foam Cutting oil DVGW Cooling lubricant Ultra Cooling lubricant Ultra HD
Materials
Steel, alloyed steel xx xxx xxx xxx xxx xx xx xxx
High-alloy steel xx xxx xxx xxx xxx xx xx xxx
Cast iron, grey cast iron xx xxx xxx xx xxx x xx xxx
Tungsten carbide xx xxx xxx xx xxx x x xx
Non-ferrous base metal (copper, brass, etc.) xx xxx xx xxx xxx x x xx
Titanium x xxx xxx xx xxx x x xx
Magnesium x xxx xxx xx xxx x x xx
Aluminium, aluminium alloys x xxx xxx xx xxx x xx xxx
Machining processes
Lathing, automatic lathes xx xxx x x x x xx xxx
Drilling, countersinking, reaming xx xxx xxx xxx xxx x xx xx
Deep drilling x xxx xxx xx xx x x xx
Sawing xx xxx xx xxx xxx x xx xx
Thread cutting xx xxx xxx xxx xxx xx xx xx
Thread forming, rolling xx xxx xxx xxx xxx x x xx
Milling x xxx x xx xx x xxx
Sanding x xxx x x x x xxx xx
Forming, rolling, bending x xxx xx xx xx x x xx
Punching, fine punching x xx xx xx x x x
Broaching, toothing x xxx xx xxx xxx x x x
Features
Basis Mineral oil Mineral oil with synth. ester Mineral oil with synth. ester Synth. ester Glycol and ester Ester Mineral oil Mineral oil
Viscosity (mm²/s) 12 25 Paste-like 35 n/a 5 66 76
Minimum quantity lubrication ⎷ ⎷
No mandatory warning symbols ⎷ ⎷ ⎷ ⎷
Can be used overhead ⎷ ⎷
DVGW-approved ⎷
Biodegradable/approved for use with food ⎷
Extremely high lubricating performance ⎷ ⎷ ⎷ ⎷ ⎷
Extremely long tool life ⎷ ⎷ ⎷ ⎷ ⎷ ⎷
Minimal smoking ⎷ ⎷ ⎷ ⎷ ⎷ ⎷
Extremely low consumption ⎷ ⎷ ⎷ ⎷
Good creeping properties ⎷
Free of boric acid ⎷ ⎷ ⎷ ⎷
Low-foaming ⎷ ⎷
Extremely high microbial stability ⎷ ⎷
Water hazard class 1 1 1 1 2 1 1 1
Formaldehyde-free ⎷ ⎷ ⎷ ⎷
Extremely gentle on the skin (amine-free) ⎷ ⎷ ⎷
xxx excellent suitability
xx good suitability
x less favourable suitability
⎷ applicable

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Würth Catalogue

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information
Show all product details