Double-sided tooth plate connector type C10

Name: Double-sided tooth plate connector type C10
Brand: Würth
SKU: 045104165

Wood connector/ press-in anchor type C10
DWL-EN912-C10-DBSIDED-(A4K)-D65/35MM

Art.-no. 045104165

EAN 4038898066019

All versions

Similar products

Prices for customers after login

Double-sided tooth plate connector type C10

Art.-no. 045104165

Prices for customers after login

Quantity

x 50 pcs

Exclusively for trade customers

Login/Register
Call customer service: +34928189825

Double-sided tooth plate connectors (type C10) are used for wood-wood connections (softwood) in combination with bolts or wood screws to absorb shear forces. The bolts or screws subject to load absorb the clamping and tensile forces in the bolt axis.

In line with DIN EN 912:2011-09

Material: Malleable iron EN-GJMB-350-10 in line with DIN EN 1562

Surface: Galvanised, A4K

Application in utilisation classes 1 and 2

Notice

Transverse load in the compressed surfaces should not be higher than 2.5 N/mm² for solid wood or 3 N/mm² for laminated wood. Alternatively, double-shear connections can also be made using ASSY plus full-thread screws in combination with washer head screws.

Available work documents:

Load tables and detailed processing instructions can be found on the service page www.wuerth.de/holzverbinder.

CE marking in line with EN 14545:2008

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Application area

Used to manufacture double-shear, shear-loaded, wood–wood connections made from softwood, e.g. half-lap joints, frame corners, collar beams, coupling purlins and grain-cut timber connections.

Instructions

Double-sided tooth plate connectors, type C10, are attached using dowel pins and nuts. Alternatively, ASSY wood screws can be employed. Tooth plate connectors, type C10, can be used for grain-cut timber connections. Suitable fasteners: Bolts with washers and ASSY 3.0 combination screws with washers and ASSY 3.0 SK (<95 mm).

Assembly

1. Bore a hole for the bolt and nut in both timber components. The bore diameter for bolts in wood may only be max. 1 mm larger than the nominal diameter of the bolt.

2. Position the double-sided tooth plate connector in the timber component. When using a double-sided tooth plate connector, the dowel must not touch the bolt. These can be embedded to prevent a gap between the components. It is not permitted to drive in the connector by hitting the teeth directly.

3. Drive in the tooth plate connector by tightening the bolt torque or using a hydraulic driving tool. Alternatively, special driving tools can be used.

4. Tighten the bolts if the wood cross-section tapers.

Type	C10
Design	On both sides
Nominal diameter	65 mm
Diameter of hole	35 mm
Thickness	3.0 mm
Height	27.0 mm
Number of teeth per circle and side	14 PCS
Material designation	EN-GJMB-350-10
Surface	Zinc plated
Material	Malleable cast iron
EN standard	912

Required accessory:

Product

Description

Quantity

Price
/PU

Hexagonal bolt with shank SB FITTINGS DIN EN 15048-1 ISO 4014, steel 8.8U, hot-dip galvanised, with nut ISO 4032

SCR-4014-8.8U-NUT-4032-8-(HDG)-M12X220

Art.-no. 0059412220

x 25 pcs

Hexagonal bolt with shank SB FITTINGS DIN EN 15048-1 ISO 4014, steel 8.8U, hot-dip galvanised, with nut ISO 4032

SCR-4014-8.8U-NUT-4032-8-(HDG)-M12X260

Art.-no. 0059412260

x 25 pcs

Hexagonal bolt with shank DIN 601, steel 4.6, plain

SCR-HEX-NUT-DIN601-4.6-WS19-M12X220

Art.-no. 007712 220

x 25 pcs

Bit retainer For ASSY screws

BITRTNR-ASSY-CS/SK-1/2IN-12MM-D10MM

ASSY

Art.-no. 016530092

Ideal for mechanical attachment of bits and screw heads when driving-in screws.

x 1 pcs

Metric double open-end wrench DIN 3110/ISO 1085

DBOPNENDSPN-WS18X19

ZEBRA

Art.-no. 0713304189

ZEBRA® professional-quality tools in a wide range of sizes

Metric double open-end wrench DIN 3110/ISO 1085

DBOPNENDSPN-WS24X26

ZEBRA

Art.-no. 0713304246

ZEBRA® professional-quality tools in a wide range of sizes

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).