Door handle A 806 on oval escutcheon
Door handle hole plate A 806
DH-A2-A806/FS-OVAL-ROS-L/R-MATT
Register now and access more than 125,000 products
- Handle and base rosette are permanently connected and ensure the best possible hold, attachment is via rivet nuts and metric screws
- Versatile combination options and low storage costs, as all articles individually available
- The hole plates can be used in DIN R and DIN L doors without alteration
Square pins or panic pins must be ordered separately.
The FS approval only applies to complete Würth FS sets or combinations of Würth FS individual parts that form a coordinated assembly in accordance with DIN 18273. Only genuine Würth parts may be used for assembly. The assembly work, incl. all components (screws and pins), must be performed by a qualified expert according to the instructions. Failure to do so will void any warranty claim.
Specified dimensions not binding. Subject to technical changes.
Datasheets(X)
For real estate sector (tubular frame doors).
 | |
Area of application | Object area |
Rosette thickness | 13.5 mm |
Suitable for | Fire protection doors |
Fire protection certified | Yes |
Shape of door handle | GE (Frankfurt type) |
Bearing Technology | Door handle, fixed |
Material | Stainless steel A2, 1.4301 |
Gloss level | Matt |
DIN direction | DIN R/L |
Standards | EN 1906, DIN 18273 |
Utilisation category | Class 4 |
Environmental Product Declaration | Yes |
Type of assembly | Screw-on |
Square size | 9 mm |
Insertion depth | 31 mm |
Handle length | 158 mm |
Handle diameter | 21 mm |
Hole distance | 50 mm |
Length of rosette | 70 mm |
Width of rosette | 33 mm |
Handle height inc. rosette/ label | 73 mm |
| Classification key in line with DIN EN 1906: 2012-12 | |||||||
| For art. no. 0687 158 060 | |||||||
| 4 | D9* | - | 0 | 1 | 4 | 0 | A |
| * 1 million test cycles, tested according to MPAZert | |||||||
| Classification key in line with DIN EN 1906: 2012-12 | |||||||
| For art. no. 0687 158 560 | |||||||
| 4 | D9* | - | B1 | 1 | 4 | 0 | A |
| * 1 million test cycles, tested according to MPAZert | |||||||
Last viewed
1/4 inch socket wrench insert, metric short
Ratchet for 10 mm bits
Energy-saving bulb
1/4 inch bit ratchet
pias® drilling screw, raised countersunk head with AW drive
Collated nails and gas cartridge NG CS-2/3
Plug-in nipple Series 2000
Mercurium impregnation
Shim ring DIN 988, steel, plain
Universal holder E 6.3 (1/4") With stainless steel sleeve, snap ring and permanent magnet