Direct to rust enamel smooth effect
Corrosion protection varnish
PENTOX SILVGRRUSTPR.GLOS.PAINT.FL.FIN.4L
Register now and access more than 125,000 products
Features:
- Effective even on rusty metal surfaces. No need to remove rust; simply sand and remove poorly adhered particles.
- No need for primers or corrosion protection. Saves time and money, as a prior treatment does not need to be applied (see general recommendations). Indicated for outdoor and indoor use.
- Good coverage.
- Shiny rust-resistant enamel.
- High adhesion.
- An airtight seal is obtained to prevent the passage of moisture.
- Can be applied to iron, steel, galvanised surfaces, wood, new work, restorations or maintenance, enamel paints.
These instructions are merely recommendations based on our experience. We recommend performing tests for each new type of application or surface to be treated.
Datasheets(X)
Instructions for use
Shake before use until perfectly mixed. Apply to clean, dry surfaces.
Prepare the surface (see general recommendations). For proper protection, we recommend applying 120 dry microns of enamel. (2-3 coats).
Handle in ventilated areas.
Cleaning and thinning with solvent for direct to rust enamel art. no. 0828900600, according to the attached table.
General recommendations
Iron and steel
No need to remove rust; simply sand and remove poorly adhered particles and loose rust.
Apply 2-3 coats for proper protection.
Galvanised surfaces
Use primer beforehand for galvanised surfaces.
New wood.
Use wood sealant beforehand.
Gypsum, cement and derivatives
Remove saltpetre, moisture or any foreign products beforehand.
Paint
If the paint is in poor condition, remove it mechanically or chemically.
If the paintwork is in good condition, simply clean and degrease. If the finish is glossy or shiny, sand the surface to improve adhesion.
Do not apply on surfaces that are wet, heated or very hot.
Do not apply when the relative humidity is greater than 80 %.
Shelf life from production | 24 Month |
Last viewed
Carro 3 MOTION WÜRTH
Spare parts - machines
Lux Chrono watch, stainless steel
Ring screw DIN 580, steel C15E, plain
Hexagonal bolt with thread up to head for pressure container construction ISO 4017, steel 5.6, plain
Dust extraction For socket cutters without quick-change function
Vehicle dry abrasive paper disc RED PERFECT®
Rechargeable battery LI-CV-18 V
Rechargeable LED Head lamp Ergopower Sensor
Roadside assistance LED