Diesel stabiliser
Diesel additive Diesel Stabiliser
ADD-DISL-STABILISER-1000ML
Register now and access more than 125,000 products
Prevents bacterial growth
Ensures functionality
Fights existing acute bacterial contamination
- Neutralises acids forming due to growth of microbes
- Decontaminates fuel systems already affected
- Restores functional reliability
This information is based on careful investigation and may be considered reliable, however it should be considered advisory and without commitment. Take care when using biocidal products. Always read the label and product information before use.
The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications as well as storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by the provision of this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products.
Datasheets(X)
This highly effective biocide increases operational safety for all diesel systems. For construction machinery, commercial vehicles, motor homes, passenger cars or in storage tanks
Add to the tank in a ratio of 1:1000 (preventative measure) or 1:200 (problem-specific); 50 ml is sufficient for 50 l fuel.
Contents | 1 l |
Colour | Transparent |
Smell/fragrance | Characteristic |
Chemical basis | Biocide, detergent |
Shelf life from production | 24 Month |
Density | 0.867 g/cm³ |
Density conditions | at 20°C |
Min. flashing point | 62 °C |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
HSS spot weld drill bit
Flat washers Standard range ISO 7089 polyamide 6.6 natural
Door handle AL 900
Hexagon nut DIN 934, steel I6I/I8I, zinc-plated, blue passivated (A2K)
Hexagonal bolt with flange in accordance with MBN standard
Flanging mandrel SAE – OP1 for mobile universal flaring tool
Door handle A 810 on oval escutcheon
Air spiral line, universal
Sandpaper triangle Useit® Superpad, wood
Slotted countersunk head screw DIN 963, A2 stainless steel, plain