Diamond wet cutting disc ZENESIS
Diamond wet cutting disc ZENESIS for granite
CUTDISC-DIA-LLR-GRANITE-BR60-D350MM
Register now and access more than 125,000 products
Wet cutting
- Diamond segments positioned using Zenesis technology.
- Always cuts the same from beginning to end.
- Never needs to be sharpened.
- Leaves virtually no cut marks (scratches) on the sides of the cut stone.
- Suitable for both hard and soft stones (including marble).
- Can be used on both automatic and manual machines.
- Never forces the cut.
- Excellent disc life.
- Excellent compatibility with different materials.
Datasheets(X)
Precise cutting of granites and natural stone in a stationary bridge cutting machine or torpedo-type manual machine.
Ideal working speed = max. rpm indicated on the disc.
Always install the disc so that the direction of rotation matches that of the machine.
Install the disc precisely, because eccentricity causes high wear and deformation of the diamond part.
Always cut with plenty of water
Diameter (Ø) | 350 mm |
Drill hole | 60 mm |
Last viewed
Pin terminal connector RAM/RAM plus 3.5
Hexagon head bolt DIN EN 14399-4, steel 10.9, hot-dip galvanised (hdg), for high-strength structural bolting assembly
Blind bucket rivet, flat head
Laser distance meter WDM 2-18
Surface cleaner For splash-proof cleaning with the high-pressure cleaner
Plastic base with anti-slip plate
High Power battery
Hard-pressed compact fleece disc With fabric plate
TX bit C 6.3 (1/4 inch) with hole
Twist drill bit HSS DIN 340 type RN 130°