Diamond tile dry core drill bit, 1/4 inch, hexagon shank
CREBIT-DRY-DIA-TILES-HEX-E-L80-WL40-D12
Art.-no. 5457230012
EAN 4053479430379
Register now and access more than 125,000 products
Quick drilling
due to vacuum diamond coating
With special cooling wax
When drilling for more than 30 seconds, take short breaks to allow the drill bit to cool down.
Standard ¼-inch hexagonal shank, shape E
- No slippage in the drill chuck
- Suitable for any bit mount
- No water necessary!
- Speed regulation not necessary.
- The drill bits are approximately 0.5 to 1 mm longer than required. This makes it easier to drill further into the base material (e.g. a stone drill bit), preventing damage to the tile.
Datasheets(X)
- Particularly suitable for tiles and stoneware with a thickness of up to 15 mm. Thicker materials up to the specified working length can still be drilled, but more frequent breaks will be needed to allow the drill bit to cool down.
- Suitable for hard ceramic, thin granite and marble panels and hard-baked bricks.
- Spot drilling: Hold at an angle when the bit is moving, then gradually move it to a perpendicular position.
- Light circular movements increase the drilling speed and preserve the core bits.
- Note: When drilling for more than 30 seconds or when drilling through thick materials, take short breaks to allow the drill bit to cool down.
- Regular breaks to allow the drill bit to cool down generally increase the service life of the core drill bits.
- Only use drill bits in rotating mode!
- Use powerful drill. Minimum rotation speed 1000 rpm (higher speeds significantly shorten the drilling time and extend the service life of the core bit) and a minimum of 12 V for cordless tools.
- Always use suitable protective equipment.
Versatility (points system) | 2 of 4 points |
Service life (points system) | 3 of 4 points |
Drilling speed (point system) | 2 of 4 points |
Bore hole quality (point system) | 2 of 4 points |
Drilling pattern (points system) | 2 of 4 points |
Problem solver (points system) | 3 of 4 points |
Diameter (Ø) | 12 mm |
Working length | 40 mm |
Length | 80 mm |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
Nitrile chemical protective glove
Combination adapter A4/A2 for cylinder saw
Moveable flange
Swivel bar for furniture locks
Professional flat-position welding nozzle
Countersunk head screw with square neck DIN 608, steel 8.8, plain with nut according to DIN 934
Cloth-backed sanding belt, synthetic corundum for electric sanding file
Hexagon nut with clamping piece (all-metal) DIN 980, steel 8, zinc-plated, blue passivated (A2K)
3/8 inch cardan joint
Surface cleaner