Diamond dry sanding disc
Diamond dry sanding disc
SNDDISC-DIA-CONC/STONE-COR-BR22,2-D180MM
Register now and access more than 125,000 products
Quick and effective sanding of extremely hard materials
Removes glues for tiles, carpet and parquet
Removes concrete protrusions from reinforcement joints
Surface levelling in general
Avoid use on wood and glass
Vacuum sinterisation process (Vacuum brazing technology) at high temperature (1000°C)
Diamond surface: over 75%
The large quantity of diamond means that the disc is always dressed and can always remove stock aggressively without going blunt
Four times longer service life than products made using other technologies
Stock removal speed more than double that of diamond pads, thanks to the grits that sand the material aggressively at the same time
Occupational health and safety
Angle grinders with safety guards must be used. Although the tool is very safe, wear Personal Protective Equipment when working with it
Datasheets(X)
Cement, plaster, granite, stone in general, marble, metal
Do not force the pressure on the surface to be sanded; on synthetic materials (PVC-ABS-Plexiglas) reduce the rotation speed and cool the tool sporadically to avoid the removed stock from fusing on the diamond grits
Diameter | 180 mm |
Thickness | 1.2 mm |
Drill hole | 22.2 mm |
Max. rotation speed | 8600 rpm |
Material | Stainless steel |
Colour | Red |
Product weight (per item) | 482.000 g |
Last viewed
C 6.3 TX bit (1/4 inch)
System bolt For cam lock nut 15
Tapping screw, countersunk head
Sliding door shell-type handle
Twist drill bits HSS DIN 338 type RN TIN head
30-mm point chisel, hex.
Hexagonal bolt with thread up to the head DIN 933, A4 80 stainless steel, plain
Single-lever sink PRO
Double open-end wrench assortment
Glazing packer assortment For long-lasting, professional block setting of glazing units