Diamond disc FINE PLUS 200 mm
Diamond dry cutting disc FINE PLUS
CUTDISC-DIA-(FINE PLUS)-ST-BR25,4-D200MM
Register now and access more than 125,000 products
Features
- 200 mm diamond disc for wet cutting ceramic and porcelain materials on portable water tables and cutting tables.
- Continuous diamond segment.
- Hardened, ground, tensioned and balanced core that ensures correct operation.
- Especially suitable for our cutting table NTS 70 Art. no. 0701 407 2 and for cutting tables with shaft diameter 25.4 and 200 mm.
- OSA.
Advantages
- Fast and precise cutting thanks to continuous belt.
- High disc performance due to diamond quality.
- Improved table performance as the machine does not brake.
Benefits
- Time-saving.
- Reduced disc change due to its long useful life.
Datasheets(X)
For cutting construction materials such as brick, marble, ceramics, stoneware, porcelain stoneware etc.
Disc suitable for cutting table NTS 70
Ideal working speed = max. rpm indicated on the disc. Always install the disc itself so that the direction of rotation indicated by the arrow corresponds to that of the machine. Install the disc precisely, because eccentricity causes high wear and deformation of the diamond part.
These simple operations will extend the life of the disc.
Diameter (Ø) | 200 mm |
Drill hole | 25.4 mm |
Segment height | 10 mm |
Segment thickness | 2 mm |
Number of segments | 1 PCS |
Segment connection | Sintered |
Max. circumferential speed | 80 m/s |
Last viewed
Fixanchor internal thread W-FAZ-IG/A4 - push-through installation
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Twist drill bit HSS DIN 338 type RN 118°
Safety screw
Glow plug removal set 23 pieces
Screwdriver PH striking cap with hexagon shank
1/2" multi-socket wrench one tool for all applications
Flat cover cap, for hexalobular socket and AW drive
Electrician's scissors stainless, hardened, matte
Interchangeable cylinder cores for locking system MS 5000