Diamond cutting discs TURBOLASER
Diamond cutting disc TURBOLASER
CUTDISC-DIA-DRY-TURBOLASER-GRANITE-D115
Register now and access more than 125,000 products
- High-quality diamond cutting segments with soft metal powder composition.
- High cutting speed and high working performance.
- Steel core grade F-222.
- German DSA approved discs.
- Laser-welded segments provide the greatest strength and safety.
Datasheets(X)
Ideal working speed = max. rpm indicated on the disc.
Cutting progress must be under the machine's own weight only; do not exert any pressure.
Always install the disc itself so that the direction of rotation indicated by the arrow corresponds to that of the machine.
Install the disc precisely, because eccentricity causes high wear and deformation of the segments.
Maintain exact blade pitch during cutting and avoid side-to-side oscillations or movements of the machine.
During work, it is essential to take breaks from cutting, allowing the blade to run idle for a few seconds to allow better cooling.
This simple operation will extend the life of the disc.
Last viewed
Wheel hub grinder type A
Circlip pliers, shape A for shaft circlips
Hexagon nut ISO 4032, A4-70 stainless steel, plain, for pressure container construction
Sheet metal nut, type 2 Open screw-in area
ZD 21 door handle, escutcheon fitting
Trousers LUMEN PRO HV
Dispenser system
Synthetic corundum flap wheels
PU Marine adhesive sealant Multi
1/2" socket wrench insert For TX screws, short