Diamond cutting discs TURBOLASER
Diamond cutting disc TURBOLASER
CUTDISC-DIA-DRY-TUBOLASER-GRANITE-D230MM
Register now and access more than 125,000 products
- High-quality diamond cutting segments with soft metal powder composition.
- High cutting speed and high working performance.
- Steel core grade F-222.
- German DSA approved discs.
- Laser-welded segments provide the greatest strength and safety.
Datasheets(X)
Ideal working speed = max. rpm indicated on the disc.
Cutting progress must be under the machine's own weight only; do not exert any pressure.
Always install the disc itself so that the direction of rotation indicated by the arrow corresponds to that of the machine.
Install the disc precisely, because eccentricity causes high wear and deformation of the segments.
Maintain exact blade pitch during cutting and avoid side-to-side oscillations or movements of the machine.
During work, it is essential to take breaks from cutting, allowing the blade to run idle for a few seconds to allow better cooling.
This simple operation will extend the life of the disc.
Last viewed
Hexagon nut with flange DIN 6923, steel 8, zinc-plated, blue passivated (A2K)
Countersunk head screw with hexagon socket ISO 10642, A4-070 stainless steel, plain
Standard cable tie with plastic latch
Hammer drill bit cassette with SDS and Duo-S Vario drive arbor Seven pieces
Halogen-free threaded connector LH IP67
1/4 inch socket wrench insert, metric short
Plastic handle with HSS round cutting blade
Wire end ferrule with plastic sleeve
Twist wood drill bit HSS With 1/4 inch bit mount, DIN 3126 shape C
Hexagonal bolt with shank