Diamond cutting disc Fine Cut Plus
Diamond cutting disc Fine Cut Plus
CUTDISC-DIA-STONEWARE-BR22,2-D230MM
ZEBRA
Register now and access more than 125,000 products
Optimal cut
- The cooling function of the structured segment sides allows for closure of the compensation slots as a result of heat-induced expansion. This enables an edge with a closed cutting surface.
Extended service life
- In comparison to conventional tile-cutting discs, the 10 mm-high segment guarantees a considerably longer service life.
Optimised diamond structure
- For all hard and extremely hard materials. Fine, very clean cutting edge with minimal dust formation.
Datasheets(X)
For angle grinders, for cutting tiles, stoneware, glazed tiles, earthenware (gres), granite, other natural stone, glazed pantiles, clinker brick, marble.
Diameter (Ø) | 230 mm |
Drill hole | 22.23 mm |
Segment height | 10 mm |
Segment thickness | 2 mm |
Number of segments | 1 PCS |
Segment connection | Sintered |
Max. circumferential speed | 80 m/s |
Last viewed
Countersunk screw with hexagon socket head ISO 10642, steel 10.9, plain
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, plain
1/2-inch socket wrench insert, TX head For external TX screws, short
Collated nails and gas cartridge NG CS-2/3
Suction hose, electrically conductive For ISS and TSS series
Metric double box-end wrench with POWERDRIV®
Joint For Top Gun paint guns and cleaning gun
3/4-inch impact socket wrench insert hexagon, metric, short
Dark screen For Ultimate face shields
One-way runner For REDOSLIDE Z40-G sliding door fitting set