Designer glass shelf support
Designer glass shelf support to insert
SHLFSPRT-INSERT-GLS-ZD-(NI)-8/10MM-PLGD5
Register now and access more than 125,000 products
- 5-mm diameter pins
- Clamping range up to 10 mm using the adjustment screw
- Load capacity: 6.5 N/dm² (4 supports in accordance with DIN EN 14749)
Material: Die-cast zinc, nickel-plated, with plastic adjustment screw (PA6)
- High degree of resistance to breakage
- Elegant, high-quality surface
Specified dimensions not binding. Subject to technical changes!
 | |
Material | Die-cast zinc |
Surface | Nickel plated |
Drill diameter | 5 mm |
Min. drill hole depth | 8 mm |
Min. glass thickness | 8 mm |
Max. glass thickness | 10 mm |
Datasheets(X)
Last viewed
Halogen-free rigid pipe 4422
Reserve taper grooved dowel pin ISO 8741 steel plain
Double-end box wrench, deep depressed centre 8 pieces
3/8-inch socket wrench insert, metric long
Charging cable for CLL 18, CLLG 18 and PLL 18
TX bit with hole
Hand tap, second tap HSS DIN 352
Expander tool for drop-in anchors, without visual installation control
Big box breakable glazing packers
Klebfix superglue
