Damping mat
Damping mat roof
DAMPMAT-300X300X-(H10-36)-5DGR
Register now and access more than 125,000 products
- Suitable for 300/300 and 500/500 mounting rail feet
Datasheets(X)
For evening out roof pitches (2.5° or 5°) on flat roofs, suitable for mounting rail feet (art. no. 0862003060/065).
Installation: Lay the damping mat beneath the mounting rail feet (wide side at the bottom). Align all rail feet exactly at the same height (e.g. with rotary laser level or spirit level).
Load distribution: Ensure that the load is distributed evenly across all rail feet in order to avoid selective overloading.
Notes: Only suitable for roofs with max. 5° pitch. For questions regarding load or installation, consult a structural engineer.
Length | 300 mm |
Width | 300 mm |
Min./max. height | 10-36 mm |
Material | Styrene butadiene rubber |
Product weight (per item) | 1830.000 g |
Max. roof slope | 5 Degree |
Min./max. temperature resistance | -40 to 80 °C |
Last viewed
Collated nails and gas cartridge NG CS-2/3 HFB
Bit box, size 3 33 pieces
Combination wrench, inch with POWERDRIV®
ASSY® 4 RCS fittings screw Steel brass-plated full thread raised countersunk head
System insert 8.4.1, socket wrench 1/4 inch and 1/2 inch
SAFETY SHOES
Innovative and comfortable safety shoes. Due to the insulating sole, the shoes are recommended for electricians working in dry environments.
Cutting knife, curved
1/4" socket wrench insert metric, long
Dispenser system
1-inch impact socket wrench insert hexagon, metric, short