Cutting disc for steel and stainless steel
Cutting disc for steel and INOX steel
CUTDISC-STEEL/A2-SR-TH2,0-BR22,23-D230MM
Register now and access more than 125,000 products
- Suitable for cutting steel and INOX steel as well as for lightweight cutting work on cast iron
- Free from iron, chlorine and sulphur (≥ 0.1%)
- Fast, precise cut, minimal heat and noise production
- Minimal burr and spark formation during cutting
Datasheets(X)
For cutting thin to medium-thick sheets, profiles, box profiles etc.
Versatility (points system) | 3 of 4 points |
Service life (points system) | 2 of 4 points |
Cutting ability (point system) | 3 of 4 points |
Handling/user-friendliness (point system) | 2 of 4 points |
Cut quality (point system) | 3 of 4 points |
Diameter | 230 mm |
Thickness | 2 mm |
Drill hole | 22.23 mm |
Design | Straight |
Max. rotation speed | 6600 rpm |
Max. circumferential speed | 80 m/s |
Last viewed
Rubber washer For vacuum lifter
Large recycling bag
3/8" cardan joint insert short
Mounting tweezers X-cut, rounded tips
Screw fitting
Angle grinder protective panel on both sides WSH 230
Hexagonal bolt, with thread to head and fine thread DIN 961, steel 12.9, plain
1/2 inch socket wrench insert metric, hexagon, short
Support Plate For 115 and 125 mm diameter flexible sanding discs with ceramic abrasive grain
Raised contersunk head tapping screw, C shape with H recessed head DIN 7983, A2 stainless steel, plain. With cross recess.