Cutting disc for steel
Cutting disc for steel
CUTDISC-BLUE-ST-CE-TH2,5-BR22,2-D125MM
Register now and access more than 125,000 products
- Synthetic resin-bonded, fibrous material-reinforced standard cutting disc
- For free-hand cutting with electric or pneumatic angle grinders
- High break resistance
- Max. circumferential speed 80 m/s
- Storage: Dry, at 20°C room temperature
- Work only with appropriate protective clothing.
- Always use an appropriate protective hood when performing cutting work.
- Only use undamaged discs.
- Do not jam/tilt the discs during cutting. Increased risk of breakage!
- Ensure correct contact pressure.
- Always clamp cutting discs (straight design) with the metal ring facing towards the machine.
Meets the maximum safety requirements in accordance with the EN 12413 European standard.
Datasheets(X)
General structural steels, high-strength structural steels, constructional steels, tool steels, hardened steels
Cutting solid materials, pipes, profiles and metal sheets
Versatility (points system) | 1 of 4 points |
Service life (points system) | 2 of 4 points |
Cutting ability (point system) | 1 of 4 points |
Handling/user-friendliness (point system) | 2 of 4 points |
Cut quality (point system) | 2 of 4 points |
Diameter | 125 mm |
Thickness | 2.5 mm |
Drill hole | 22.23 mm |
Design | Cranked |
Max. rotation speed | 12250 rpm |
Max. circumferential speed | 80 m/s |
Last viewed
Long-sleeved shirt MULTINORM
Hexagonal bolt with thread up to the head DIN 933, steel 8.8, plain
Knife blade, L-shaped, toothed
Furniture twin castor rotatable
Corvus full-grain leather S3 safety shoe
Timing tool set 7 pieces, for Renault/Nissan/Volvo 1.9, diesel
System insert 8.4.1, screwdriver
Spare screen For Ultimate face shields
Wing repair washer According to DIN 522, zinc-plated steel, blue passivated (A2K)
ASSY® 4 CSMP universal screw Steel zinc plated partial thread countersunk milling pocket head