Cradle levelling system for tiles
Levelling system for tiles with wedge
LEVLSYS-CLIP-LINEAR-PP-1MM
Register now and access more than 125,000 products
Features
- Wedge made from highly resistant and reusable polypropylene. Compatible with other similar systems. Flexible material allows for readjustment during use.
- Base made from polypropylene compatible with our wedge and with most of wedges on the market.
- Pliers made from very strong and durable carbon steel. Opening extension and maximum tightening can be adjusted.
- For floor and wall applications.
- The bases are installed along the sides of the floor tiles.
- For joint widths from 0.5 mm to 4 mm.
- Tile thicknesses from 2 to 15 mm for bases from 1 to 4mm. For the 0.5 mm base, the tile thickness is between 2 and 13.5 mm.
Advantages
- This avoids unevenness during the process of placing the tile.
- Reduces floor tile movement while curing the adhesive.
- A higher pressure can be applied and easily replicated during installation thanks to the use of the pliers.
- The wedge can be re-used.
Benefits
Improves the finish when placing the floor tiles, obtaining a perfect planimetry.
Do not cut the base against the direction of the joint.
Datasheets(X)
Insert the linear base by fitting the tile 5 cm from the corner of the floor tile. Place the wedge in the base opening. The tile is levelled with the use of pliers. After 24 hours, remove the base, always tapping in the direction of the joint.
Thickness | 36 mm |
Colour | White |
Material | 100% polypropylene |
Width | 34 mm |
Height | 39 mm |
Last viewed
TX double box-end wrench
1/4" multi-socket wrench insert bi-hex, multi profile
High Power battery
Aluminium airline lashing rail with round cord
Tiomos comfort marking gauge
Sleeves
1-ear clamp with insert ring
Application nozzle Standard For 310 ml plastic cartridges
Toothed ring drill chuck
Twist drill bit HSCo DIN 338 Type RN MFD VARIO